质量保证基准重点强调半成品和成品珠宝的工艺。 了解如何评估铂金戒圈中珠镶钻石的品质。

Close-up perspective view of a section of the shank of a platinum solitaire, featuring diamonds set in a bead-style prong setting. The top of the setting is visible.
Diamonds are equally spaced approximately 0.10 mm apart

钻石以相同的间距分开镶嵌,每两颗钻石相隔约 0.10 毫米。

Bead prongs are proportionally sized, consistently rounded, and smooth so the ring is comfortable to wear

珠形镶爪比例尺寸适合,均匀地磨圆,表面平滑,所以戒指戴着很舒服。

Bead prongs are proportionally sized, consistently rounded, and smooth so the ring is comfortable to wear

戒圈很厚,可以牢牢支撑珠镶钻石,确保正常佩戴。

To maintain shank strength, there are no openings or drill holes beneath the settings. The bearings support the diamonds above the shank surface to allow for easier cleaning

为了保持戒圈的强度,镶座下面无缝隙和钻孔。 镶槽支撑着戒圈上方的钻石,确保更易于清洁。

Perspective view of a platinum solitaire ring, featuring diamonds in the shank set in a bead-style prong setting
If the ring has been properly sized, the shank should be round and the stones tight and secure

如果戒指已经过合适的尺寸调整,戒圈应该是圆的,宝石也牢固安全。

Shank thickness is substantial enough to support bead-style settings securely during normal wear

戒圈的厚度可以在正常佩戴时牢牢支撑珠镶钻石。

Close-up side view of a section of the shank of a platinum solitaire, featuring diamonds set in a bead-style prong setting. The side of the setting is visible.
Bead contact on crowns ranges between 30 and 40%, and beads – even split beads – are ample enough for proper setting and stone security

珠形镶爪与冠部的接触面为 30% 至 40%,而珠形镶爪(甚至半珠)的份量充足,可以进行适当的镶嵌,确保宝石牢牢固定。

Each bearing is precisely fitted to the stone size, and diamonds are seated securely

每个镶槽都准确贴合宝石的尺寸,将钻石牢牢固定。

戒圈上镶嵌钻石的铂金戒指的最佳操作规范

正常佩戴时,如果珠宝出现问题,则可能是珠宝制作不当,或制造之后处理不当。 分享铂金戒指的最佳操作规范可以让客户对所购物品的品质和价值更有信心。

铂金戒指透视图,可以看到一颗蓝宝石主石两侧饰有数颗钻石,镶嵌于戒圈之中。

应该确保戒指的维修或修改简单、实惠、省时。

进行剧烈的身体运动时,戒圈不应该变形。

这种戒圈上的钻石镶嵌与上图中的戒指采用不同的风格,但在精准的镶座、戒圈厚度和宝石上的铂金覆盖量方面却遵循相同的标准。

John T. Haynes, Inc.(位于德州达拉斯)的 Jeffrey Mathews(杰弗里·马修斯)手工打造了这枚镶嵌着蓝宝石和钻石的铂钌戒指。
铂金戒指侧视图,可以看到一颗蓝宝石主石两侧饰有数颗钻石,镶嵌于戒圈之中。

正常佩戴时,镶座不应该弯曲、断裂或被损坏。

不应该在脆弱的佩戴位置进行细节装饰,如珠镶钻石、雕刻或精致的纹理。

John T. Haynes, Inc.(位于德州达拉斯)的 Jeffrey Mathews(杰弗里·马修斯)手工打造了这枚镶嵌着蓝宝石和钻石的铂钌戒指。
铂金戒指底部视图,可以看到一颗蓝宝石主石两侧饰有数颗钻石,镶嵌于戒圈之中。

无论何种原因,宝石都不应松动或脱落。

John T. Haynes, Inc.(位于德州达拉斯)的 Jeffrey Mathews(杰弗里·马修斯)手工打造了这枚镶嵌着蓝宝石和钻石的铂钌戒指。

推荐质量保证基准

返回页首