Feature Gems & Gemology, Winter 2017, Vol. 53, No. 4

Gem Virtuosos: The Drehers and Their Extraordinary Carvings

Gerd Dreher agate lily and Patrick Dreher citrine mouse
Figure 1. This Gerd Dreher lily carving (2005) is from a single piece of Brazilian agate and measures 11.0 cm in length. His skills are on exhibit through his use of the material and his technique, such as the curled petals that demonstrate a wealth of detail even on their undersides. The leaf, stamen, and enameled pistil accents are crafted from 18K gold and set with diamonds. Patrick Dreher’s citrine mouse (2015), 6.0 cm in length, shows attention to the animal’s stance and demeanor as well as fine detail in the carving of the fur. Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.


The German towns of Idar and Oberstein (now Idar-Oberstein) have a rich history of gem cutting and carving, notably in agate. The profession continues to be passed on from one generation to the next, as it has been for over five centuries. One of these families, the Drehers, has worked with gem materials for 13 generations. Gerd Dreher apprenticed gem carving with his father starting in 1955, while Gerd’s son, Patrick, began his apprenticeship in 1988. While they carve individually, occasionally they work together as a team. The family creates fine carvings from agates and from single crystals of high-quality rough gem minerals. These unique pieces are extraordinarily detailed and utilize natural color zoning to achieve a remarkably lifelike effect.


Viewed from any direction, the gem carvings by the father-and-son team of Gerd and Patrick Dreher are remarkably lifelike. Agate toads appear bumpy, glistening, and slippery. Brimming with personality, their eyes appear to follow the viewer around the room. A carved tiger lily emerges from banded agate (figure 1) as a velvety, dappled flower, its petals enticingly curling inward. And on the backs of these petals, details of the flower’s physiognomy are scrupulously maintained. Much like the gem materials from which they are carved, these works are one-of-a-kind creations.

Decades of experience between the two imparts virtuosity to their work, as well as a sense of humor often depicted in the subjects. Today, Gerd is globally acknowledged as a master of the craft, while Patrick has emerged from the younger generation, adding new carving techniques to the family repertoire. This enhances the formidable range of skills that have been passed down through the Dreher family for 13 generations.

Following in the path of their ancestors, the Drehers’ ability to render the anatomy of flora and fauna in astonishing detail demands an intimate knowledge of their subject matter, not to mention a deep understanding of the characteristics and attributes of the gem materials they carve. The Drehers study rough gem material, sometimes for years. From these observations they conceive a three-dimensional outcome and then set to work bringing the stone to life (figure 2). A growing collection of diamond-sintered tools, and a thorough understanding of how to use them, underpins their closely guarded lapidary techniques.

Gerd Dreher toad carved from jasper with color banding
Figure 2. Natural bands of color in a single piece of jasper were used to accentuate Gerd Dreher’s 1993 carving of an orangy red toad sitting on a green leaf (left). The small cross section to the right shows how he used the gem’s natural color banding to create the effect. The finished piece measures 10.20 cm in length. Photo by Robert Weldon/GIA, courtesy of Leslie Hindman Auction House.


An understanding of the environment that gave rise to the Dreher dynasty—as well as hundreds of other celebrated practitioners of the lapidary arts—is essential to appreciating their story. Idar and Oberstein (figure 3), two picturesque German towns separated by the Nahe River in the state of Rhineland-Palatinate, were united in 1933 to form Idar-Oberstein.

Oberstein in the late 1700s and today
Figure 3. Left: The town of Oberstein as it looked in the late 1700s. The picturesque Schloss Oberstein (the castle at the top of the hill) and Felsenkirche (the church built into the wall of the mountain) have changed little since this engraving was made. Colorized by Robert Weldon, from Collini (1776), courtesy of the Richard T. Liddicoat Library and Information Center. Right: Oberstein, as photographed in late 2015, bears a remarkable similarity to the sketch from nearly 250 years ago. Photo by Robert Weldon/GIA.

This area in southwestern Germany, nestled in the Hunsrück mountain range, became famous for its agate and quartz deposits, as well as its residents’ expertise in gem-related professions such as mining and cutting and more recently goldsmithing. Idar lore suggests that agate nodules and quartzes, such as chalcedony, jasper, carnelian, and petrified wood, were discovered by farmers as they plowed their fields centuries ago (figure 4). Agate mining and cutting flourished there for at least five hundred years.

A Brief History of Idar-Oberstein

Some believe the Romans who conquered the region used Idar’s agates more than two thousand years ago. A cameo found at Hidera, a Roman settlement in the mountains above present-day Idar, suggests this ancient glyptic use of its agates (Rapp, 2002). Other scholars dispute the Roman connection, but there is agreement that the deposits were mined during the Middle Ages. Cutters worked with gem materials from the area, and by the fourteenth century the region’s agate cutting industry was established (Ball, 1931). Traditionally, the gem cutting trade has been centered in Idar, with jewelry manufacturing and related professions evolving in neighboring Oberstein and other hamlets (Frazier, 1978).

Agate with amethyst-lined cavity
Figure 4. This agate with an amethyst-lined cavity exhibits banding that is typical of the Hunsrück deposit near Idar-Oberstein. The slice measures 27.94 cm in length. Photo by Robert Weldon/GIA, courtesy of Friedrich August Becker Edelsteine.

In the early days of the agate cutting industry in Idar, water from nearby rivers—the Nahe, the Idarbach, and others—provided energy used to turn massive sandstone wheels for cutting (Frazier, 1978). Large wheels, up to three meters in diameter, were used to shape the agate’s exterior. Cutters from the area developed a technique in which they lay stomach-down on a wooden bench. This position, with their feet pressed against the floor, or against a block of wood nailed to the floor, gave them the necessary leverage to push the gem material against the rotating wheel and cut it (figure 5). The first record of a water mill used to grind stone was in 1454 (Gerdt, 2017). A Grinder’s Guild document dating back to 1609 bears witness to the profession, including strong advice to its members: “No stranger must acquire the trade of a grinder, but the craft must be handed down from father to son” (Hadley, 1984).

Engravings of German agate cutting in the 1700s
Figure 5. Top: This engraving from a 1776 book by Colosimo Collini, who explored the agate mining regions of southern Germany, shows a water mill cross-section in Oberstein along the Nahe River. The river current rotates the water wheel, which turns a geared axis. The gears turn the large sandstone wheels used to grind and form agate. Bottom: Another engraving illustrates in detail the arduous cutting process practiced by the German agate cutters, who used their bodies and the wheel to work the object. Courtesy of the Richard T. Liddicoat Library and Information Center.

It was long, difficult work that demanded physical strength. Smaller wheels were used to refine the interior—to hollow out preform bowls, for example. Accounts passed down through the Dreher family note that agate cutters rose at 4:00 a.m. and went to the water mills in Vollmersbach to await their turn at the wheel. Much of the work had to be done around farming obligations since cutting alone could not support the tradesmen. Throughout the small artisan workshops of Idar, family secrets learned at the cutting wheel were passed down through generations. Gem carving techniques and individual styles evolved with specific creative refinements and specialties that in many cases could be attributed to different carvers or their families (Dreher, 1979).

Gem cutters later developed foot-powered devices to cut the agates, which was followed by the advent of electric-powered engines to turn the spindles. These refinements allowed cutters to sit upright rather than lying on their stomachs. One technique did not change: While in many other parts of the world the gem material is held stationary and the craftsman moves a flexible tool around it to form the desired shape, Idar’s cutters have always held the gem rough, as steadily as they can, in two hands. This practice continues today. The gem is moved around a fixed spindle, progressively grinding down the material. A wide variety of diamond tools are mounted on these spindles, depending on the effect that is needed, and the speed can range from 3,000 to 11,000 revolutions per minute (rpm). According to Patrick Dreher, both the spindles and the diamond tools are manufactured in Idar-Oberstein to each cutter’s specifications. Gradually, the process reveals the carver’s vision (figure 6).

Gerd Dreher shaping the preform of the jasper toad
Figure 6. Gerd Dreher shapes the preform of the jasper toad seen in figure 2. Gerd and Patrick Dreher both use a fixed-spindle technique while holding the gem material in their hands, a carving technique that has been used in Idar-Oberstein for centuries. Courtesy of the Dreher family.

A dramatic change in the supply of agate and quartz occurred in the early nineteenth century. The Hunsrück deposit was nearing depletion following centuries of exploitation. The resulting decline in centuries-old mining traditions could have spelled the end of Idar’s cutting trade. Fortunately, between the 1820s and 1850s, German explorers and farmers homesteading in southern Brazil found new and vastly richer sources for agate and quartz along the border with Uruguay. The agate and quartz were discovered the same way they had been in Idar centuries before: by plowing the fields. Starting in 1825, shipments of the rough gem material made their way to Idar. The quantity and quality of the Brazilian agate surpassed anything that had been known from the Hunsrück deposit. According to a Scientific American report from the time, up to 300 tons of agate were shipped each year to Idar and Oberstein, where some 6,000 people were employed in the trade (“Where agates come from,” 1882). Other Brazilian gems such as quartz, tourmaline, topaz, and beryl were eventually imported, greatly expanding the town’s offerings. The variety and availability of gem materials brought new opportunities and challenges for the cutting center.

Germany exported much of its new material to French artists in the mid-1800s, during the waning days of Romanticism. Paris was a magnet for artists of all disciplines, including fine art stonecutters and gem engravers. The new Brazilian agate spurred a revival of gem engraving and carving, enabling cutters to create cameos, intaglios, and seals using its multi­colored layers for relief (Lindemann, 2017).

Young craftsmen from Idar began flocking to Paris, learning refined engraving and cameo carving techniques from Parisian masters. The start of the Franco-Prussian War in 1870, however, hastened the Germans’ return to their native land. These artists, who now had abundant raw imported material at home, were soon able to surpass the skills they had learned in France. With the sudden influx of skilled carvers, Idar’s renaissance as a gem center was well on its way. Many artists formed engravers’ guilds upon their return, with more than 230 members in Idar and Oberstein (Pauly, 2012). The guilds helped train apprentices and enabled members to hone their cutting and carving skills. They also established a stable pricing structure for products. These developments cemented Idar-Oberstein’s modern role as a center for agate cutting and engraving. The new skills acquired in Paris also prepared the cutters for the development of three-dimensional carving.


The Deutsches Edelsteinmuseum

Accounts suggest that one of the most admired cutters and engravers in nearby Vollmersbach during the late 1800s was Wilhelm Dreher (1840–1900). His meticulous work was widely commissioned both in Germany and internationally. An agate bowl of Wilhelm’s, weighing 43 kilograms, was sent to French emperor Napoleon III (Dreher, 1979). Other items were sent to British royalty. One of Wilhelm’s sons, possibly Karl (1861–1943), produced a lapis lazuli bowl for Emperor Nicholas II of Russia in the early 1900s. While the whereabouts of the bowl are unknown today, its sale was documented in the Dreher family history (Dreher, 1979). Karl Dreher’s work, and that of other German artists at the time, marked the beginning of Idar’s three-dimensional gem-carving tradition.

The Dreher lineage has been traced back to 1620, but the family believes their ancestors began working with gems from the region much earlier. Some details were recorded in birth, marriage, and death certificates. Dreher activities were also gleaned from property ownership records, particularly with regard to lapidary mills the family bought, owned, or sold over time.

Unfortunately, many Idar and Oberstein records before 1620 were destroyed during the Thirty Years’ War (1618–1648), a religious conflict in central Europe. This period witnessed considerable devastation of churches and the loss of parish records. Destruction of records was repeated in both World Wars, leading to ambiguities about the provenance of some important unsigned works of art, where the craftsmen cannot be verified with certainty. This was true for the Drehers and many other notable agate cutting families in Idar.

Wilhelm’s son Karl was the first in the modern line of Drehers (figure 7) who developed skills as gemstone carvers, instead of simply cutters. As a young man he trained under a master carver who had returned from Paris, learning how to carve cameos, monograms, and other ornaments. These skills greatly expanded the Drehers’ repertoire as they began to add engraving and carving to their skills. With the increased exposure to international carving styles and art movements, the family’s worldview began to expand as well.

Hermann Dreher (top), Karl Dreher, and a young Paul Dreher
Figure 7. Three generations of Drehers (clockwise from top): Hermann Dreher (1886–1960), Karl Dreher (1861–1943), and a young Paul Dreher (1910–1968). Courtesy of the Dreher family.

Meanwhile, Karl Wild, a contemporary of Karl Dreher who was related to the Dreher family, saw opportunities outside of Idar and traveled to Russia, acquiring the nickname “Russ-Karl.” There he not only sold finished carvings and objects of art by Karl Dreher and others from Idar but also took orders and brought back raw materials (such as Russian lapis lazuli) to be carved. The lapis lazuli bowl mentioned earlier is one such piece.


The Dreher family, like many others in Idar, relied primarily on a series of brokers to sell their work. One notable gem dealer was Moritz Stern, who brought specific orders to Idar from abroad. These orders were placed with the town’s best carvers. Among those who recognized Idar’s lapidary talent, and who would soon use Stern’s services, was Carl Fabergé, who developed an appreciation for hardstone cutting while traveling through Florence, Dresden, and Idar in the late 1880s (von Habsburg, 1988). Fabergé was also influenced by Japanese netsuke1 carvings, amassing a collection of some 500 pieces. These were popular items from sixteenth-century Japanese clothing.

As a result of these influences, lapidary orders coming into Idar at the turn of the twentieth century included specific requests from Fabergé in St. Petersburg. Fabergé developed small plaster models of animals, which were supplied to the gem cutters and replicated in stone (Adams, 1988). These works were either assembled pieces or objects made from a single piece of stone. After the finished pieces were returned to Fabergé, his workmasters would apply embellishments such as gold legs and feet (Wild, 1981). Patrick Dreher credits these Fabergé orders with changing the family’s focus from the simple cutting of agates toward carving in more artistic forms. Karl Dreher’s son, Hermann (1886–1960), is one of the artists who provided carvings purchased by Fabergé. The Drehers say these works were faithfully carved from plaster models provided by Fabergé craftsmen (figure 8, left; Ovchinnikov, 2017). Although these models were considered worthless after the hardstone work was done (figure 8, right), and most were lost to time and history, the family managed to keep one such model.

Faberge, plaster, model, Gerd, Dreher, multicolored, jasper, toad
Figure 8. Fabergé representatives provided plaster models, such as the toad on the left, as a sample for German carvers in the Idar region to reproduce in agate. The Drehers have kept this plaster model for generations. Photo by Patrick Dreher, courtesy of the Dreher family. Right: Gerd Dreher’s multicolored jasper toad (1985), measuring 6.5 cm in height, was carved from the family’s Fabergé plaster keepsake. Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.

This period marks the earliest shift to three-dimensional gem carvings. The Dreher family maintains only two such early carvings in its possession: the rock crystal bowl seen in figure 9, and the figure of a gem carver with a bowl in figure 10.

Rock crystal quartz bowl by Hermann Dreher, ca. 1910
Figure 9. This rock crystal quartz bowl by Hermann Dreher, ca. 1910, is one of the oldest items in the family’s possession. Photo by Robert Weldon/GIA, courtesy of the Dreher family.
Paul Dreher figure of a gem carver holding a bowl
Figure 10. Paul Dreher’s figure of a gem carver holding a bowl (1935) is another of the earlier pieces in the Dreher collection. Photo by Robert Weldon/GIA, courtesy of the Dreher family.

Even with family members brokering some of the business, the hardstone carvings went unsigned and were subsumed under the Fabergé name. The venerable Russian firm relied to some extent on outside vendors for a variety of goods they could not manufacture themselves. The items supplied had to be of the highest caliber and craftsmanship, reflecting expertise simply not found in Russia at the time.

German lapidary craft is acknowledged in the Fabergé literature. References indicate that the first carved hardstone animals likely came from Idar. In Fabergé, Dr. Géza von Habsburg writes: “Fabergé took up the search for hardstone carving outside of Russia… [H]is journey led him to Idar-Oberstein, a little town specialized in the cutting and engraving of Brazilian agate.” Von Habsburg singles out the German carver Alfred Heine, working for the Wolff Company, who “produced stone animals for Fabergé.” He goes on to say that “Fabergé’s numerous commissions brought about a new flowering for the old stone cutting center” (von Habsburg, 1988). This is also acknowledged by Russian experts. “It is a well-known fact that the Idar-Oberstein masters made large quantities of carvings for Fabergé,” said Galina Gabriel, a member of the International Association of Art Critics and the Russian Union of Artists who spoke at the 2015 International Fabergé Conference in St. Petersburg.

Evolution of Gem Carving

After 1908, Fabergé acquired the Woerffel factory in St. Petersburg to handle the firm’s lapidary needs. Orders for the carved animals, commissioned through Fabergé and originally carved in Idar, consequently slowed in Germany. After World War I (1914–1918), such carvings came to an abrupt halt. Widespread social unrest in Russia culminated in the 1917 Russian Revolution and the execution of Emperor Nicholas II and his family in July 1918. Fabergé lost all of its wealthy Russian patrons. The firm was nationalized, closing its doors in November 1918 (Snowman, 1962; Faber, 2008). The destruction of records in both Germany and Russia left a gap in the full understanding of Idar carvers’ links to Fabergé. Nonetheless, the seeds had been sown for the growth of some of the world’s greatest three-dimensional gem carvers.


Having learned the trade from his father, Hermann, Paul Dreher (1910–1968; figure 11) was third in a line of carving masters. The absence of influence from Fabergé or any other major buyer provided Paul with greater creative latitude, allowing him to render animal sculptures with rich variations. A delicate, lifelike deer and a large, sinuous puma are two Paul Dreher carvings owned by the family (figures 12 and 13). In homage to his innovations, the firm today bears the name Paul Dreher Edelsteine und Gravuren (Paul Dreher Precious Stones and Engraving).

Paul Dreher in his studio
Figure 11. Paul Dreher (1910–1968) working in his studio. Courtesy of the Dreher family.
Paul Dreher carving of a doe
Figure 12. Viewed from any angle, this Paul Dreher doe (1957) is remarkably lifelike. These realistic pieces marked a new design direction in animal carvings for the Dreher family. Photo by Robert Weldon/GIA, courtesy of the Dreher family.
Paul Dreher carving of a puma
Figure 13. This puma by Paul Dreher (1965) shows exquisite overall form and beauty in its smoothness, but without the nuanced details that diamond-sintered tools would later allow. It measures 32.5 cm in length. Photo by Robert Weldon/GIA, courtesy of the Dreher family and the Deutsches Edelsteinmuseum.

Aside from his large, single-stone carvings, Paul Dreher also experimented with combinations of several carved gem materials in composite sculptures. These animal figures became very popular and were of such exceptional quality that they were sometimes misidentified as Fabergé pieces. According to Gerd Dreher (2012), “We were rather surprised to see two original carvings made by my father in the second edition (1962) of the book The Art of Carl Fabergé by A. Kenneth Snowman.” The mistake is somewhat understandable: Unsigned pieces by the Drehers, and others in Idar-Oberstein, continued to be sold through brokers or dealers. The style once inspired by Fabergé had endured for decades, long after the legendary company had ceased to exist.

Why did the pieces go unsigned? The brokers had the luxury of travel and fluency in languages used in international commerce. They often presented the pieces as a shared Idar-Oberstein quality brand. Based in Idar-Oberstein and abroad, these brokers sold the carvings internationally or in some cases passed them along as examples of their own work (P. Dreher, pers. comm., 2017). This was considered normal business practice. There were positive and negative effects of this business model. On one hand, carving families in Idar-Oberstein did not have to concern themselves with marketing and sales. They could concentrate on producing the work and take the time to develop new skills. The obvious drawbacks, however, were that the carvers did not receive recognition, build a reputation, or understand their own market. This business arrangement lasted well into the career of Gerd Dreher. The unfortunate result was that the Dreher name was not widely recognized outside of Idar-Oberstein.

Gerd Dreher, born in 1939, was trained by his father starting at the age of 16, in the time-honored local tradition of passing these skills from father to son (see “Idar-Oberstein’s Gem Industry” section above). Between the 1960s and 1980s, Gerd followed a path similar to that of his father, carving various gem materials, often in ways that could be composited to create animal figures such as the one in figure 14.

Gerd Dreher’s “Love Birds”]
Figure 14. “Love Birds” (1979) was created during Gerd Dreher’s early years, when he carved various stones and composited them to form a whole sculpture. The birds are carved from aventurine quartz, black agate, and yellow jasper with obsidian tail feathers. They are perched on a base of preserved petrified wood. The piece measures 25.40 cm tall. Photo by Robert Weldon/GIA, courtesy of Leslie Hindman Auction House.

After Gerd Dreher took over the family business, he realized the need to change how his carvings were brought to market. He finally began to sign Dreher animal carvings in the 1970s, and collectors quickly seized upon the crisp logo they saw etched along the edges of the artwork. Dreher carvings began to emerge from relative obscurity.

Gerd Dreher Reminisces

He observed that his artwork would benefit from carving single pieces of gem material—demonstrating what can be done with a single gem—albeit with accents, or an occasional quartz base to help a carving stand upright. Accents include gold fins for fish, feathered crests for birds, and tails for various animals. These accents are carved in wax and then cast in gold. Eyes are also added features, and they are sufficiently unique as to require particular attention. They are made from small translucent to opaque sections of agate, or black agates cut as cabochons. The translucent areas are lined internally with gold leaf. This results in the shimmering appearance seen in an amphibian’s eye (figure 15) or the brilliant, dark stare of a mouse. Both appear startlingly similar to real eyes.

Gerd Dreher’s “Red Baron”
Figure 15. “Red Baron” (Gerd Dreher, 2015) is a mostly rubellite tourmaline toad that gradually transitions to green tourmaline toward the base. The toad measures 7.10 cm in height and weighs 280 g (1,400 ct). Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.

By 1980, much finer diamond-sintered tools became available. “It allowed us to carve mammals, reptiles, and amphibious creatures with much finer detail than before,” Patrick Dreher recalls. These tools could also cut faster. But as Gerd Dreher cautioned his son, who was an apprentice by then, “The tools are not meant for us to produce faster. We will only use them to produce better.” Elaborate carving techniques they continue to master show refined, individual detail in fur, where even single strands can be identified (see box A). Varying degrees of carving depth create selected areas of translucency or opacity, which often evoke comparisons with actual animals. Ears on a mouse or rabbit are strikingly thin and translucent, yet they still exhibit the detailed dimples and folds seen in a live animal. Advancements in the quality of the tools, merged with a deep understanding of the subject’s appearance, imbue the creatures with stunning personalities (figures 16 and 17). Art critic Galina Gabriel considers the present generation of Drehers consummate masters, and Gerd specifically the “world’s most prestigious gemstone carver” (Gabriel, 2015; Gabriel, 2017).

Gerd Dreher carved agate emulating coral
Figure 16. Gerd Dreher’s evocative, softly undulating carved agate (2004) emulates coral. With delicately carved translucent agate fins, the fish appears to swim through the coral. The piece measures 25 cm high and weighs 1,960.8 g (9,804 ct). Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.
Gerd Dreher chameleon carving
Figure 17. This Gerd Dreher chameleon (2000), measuring 12.4 cm tall and weighing 2,390 ct, was carved from a single crystal of gem-quality Brazilian green beryl. Photo by Robert Weldon/GIA, courtesy of Silverhorn Jewelers.
Box A: The Drehers and the Gem Carving Process
Idar-Oberstein’s artists exert far more control over the shape, symmetry, details, and final polish of finished work than they did fifty years ago, thanks largely to modern diamond-sintered tools. The speed of cutting (the revolutions per minute of the spindle) has also increased. However, the Drehers prefer to use today’s tools to increase the quality and fine detail of the work, rather than to improve turnaround time. The family has maintained their proprietary secrets, but they continue to use the traditional technique of holding the gem material against a spindle to grind away gem material. The following images and short descriptions provide a step-by-step progression resulting in a final carved object of art.
Tools and Techniques

An agate nodule (figure A-1) is carefully chosen and sliced using a diamond saw into an angular, blocked shape, from which the subject size and dimensions are determined. The Drehers sometimes sketch the animal onto the flat surfaces of the agate using a pencil or marker. This helps them to visualize the finished carving and determine how the material’s color zoning will define the animal’s characteristics and personality. Gerd and Patrick Dreher use color zoning in a single block of agate to determine how the animal will be posed. Both the agate and dozens of photos of the subject—in this case, a mouse—are studied to ensure anatomical correctness.

In the second photo, Gerd Dreher has defined the three-dimensional object (a mouse), including the outlines of its tail and ears. All of the aspects of the creature’s demeanor, stance, and position have been carved into the agate (figure A-2). The Drehers use 4–6 cm diamond-sintered tools at this stage, spinning at 8,000–9,000 revolutions per minute (rpm), with continuous water drip for cooling and cleaning. Patrick Dreher explains, “This step is one of the most difficult states, because you have to cut away a lot of material; but you can’t cut too much because you cannot get it back if there is a mistake.” This stage is also critical for observation: The artist must frequently pull away from the grinding to assess the material, sketch new drawings, study color separations, and correct any mistakes. In agates, the color borders are sometimes hard to see, which may require a redesigned mouse if color patterns are off.

At this stage, the mouse has much finer characteristics, with translucent ears and more pronounced facial characteristics and tail (figure A-3). The Drehers generally use smaller diamond-sintered tools at this stage, varying from 5 mm to 2 cm. Different steps in carving require an assortment of tools and shapes as the carver exerts variable speeds (between 8,000 and 14,000 rpm) with a continuous water drip. The carver determines the thickness and fineness of the piece by varying the applied pressure. At this stage, the object, which must now have the animal’s correct proportions, begins to appear lifelike.

Carving of a mouse from an agate nodule
Figure A-1: The first step in carving is to saw the agate nodule, revealing the interior banding and zones of color. A-2: Once the concept for a mouse subject is conceived, large sections of the agate are removed in the initial carving stage. A-3: Smaller tools are used for additional definition and detail. A-4: The final step is to carve minute details including fur, dimples, and muscles, and to polish the finished product. Photos by Robert Weldon/GIA, courtesy of the Dreher family.
Gerd Dreher finishes this mouse (figure A-4) by carving extremely detailed strands of fur, defining the translucency and delicacy of the ears, adding small dimples denoting the mouse’s whiskers, and fashioning the characteristics of the rock the mouse is standing on (consider that the mouse and rock on which he stands are all one piece). At least three degrees of polishing occur: pre-polish, fine polish, and high polish. Additionally, some sandblasting takes place on the rock portion for a different degree of texture. These polishing details are performed with small brushes and diamond powder (grits not disclosed). The powder is mixed with oils to create slurry, which can easily be cleaned with water. Dreher leaves small divots in the carving in which to place the animal’s eyes, which are carved from black agate and prepared separately, then glued into place (figure A-4). Other accents may be added at this time as well, such as a gold tail or gold-feathered crests. Paraffin is never used to finish off the carvings, ensuring they will last for generations with proper care and handling. Both carvers serve as each other’s quality control, Patrick Dreher adds. “It is always great to have a new pair of eyes look at something. But this I know is true: If my father says it is finished, it is finished!”


Recent Dreher Carvings

Neatly categorized shoeboxes line the walls of the tiny Dreher studio, packed with photographs and sketches of fauna in various poses. Some are copied from books or magazines for reference. The photographs also feature animals that are live-captured by the Drehers to act as models for the carvers. It is the Drehers’ impressive collection of images and sketches that gives the family a depth of understanding about their subjects that few other carvers enjoy. Patrick Dreher recalls that on one occasion he was looking for a “preening” mouse. He could not photograph the desired pose in a captured mouse until a tiny bit of strawberry jam was strategically smeared on a small patch of the mouse’s fur. It had the intended effect: The mouse soon went to work cleaning himself. The photographs, which are taken from multiple angles, help the Drehers interpret and incorporate three dimensions into the finished object. These live animals fulfill their role as models, resulting in carvings such as the startled mouse (figure 18). After that, they are carefully released back into the wild, unaware that their likenesses are sought by collectors around the world.

Gerd Dreher mouse carving
Figure 18. A startled mouse (1997) assesses his options from inside an upturned mushroom. Carved by Gerd Dreher from smoky quartz, it measures 12.4 cm wide. Photo by Robert Weldon/GIA, courtesy of Leslie Hindman Auction House.

The Drehers carve a variety of rough gem material ranging from 5 to 9 on the Mohs hardness scale, though their stated preference is always agate. They appreciate agate’s toughness but also its wide-ranging color variations, which guarantee distinctive works of art. Carving into the layers of color zoning in agate provides the “canvas” and opportunity for three-dimensionality. Dreher carvings also appear regularly in rock crystal quartz, ruby-in-zoisite, beryl, topaz, rhodonite, obsidian, and tourmaline, among other gem materials. Here, too, the Drehers use color zoning in single crystals to their advantage, or to reveal a story in the carving.

Collectors generally supply the raw material in crystal form or as rough chunks. It is always valuable and often extremely rare. One notable example is a toad (figure 19) carved from a single piece of Brazilian tourmaline crystal provided by California gem mineral collector William Larson.

Figure 19. This parti-colored tourmaline (2013) revealed its rich colors as it was being cut. Gerd Dreher did not know at the outset that the toad’s head would be blue. It measures 10.8 cm tall and weighs 1,226 g (6,130 ct). Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.

“This piece came to us in colors of black, red, green, and black again,” Patrick Dreher recalls. “As we began to remove the black material, we saw a thin layer of blue we hadn’t seen before. This increased the value and became the head of the toad. The pink and red colors that emerged became the body of the toad, and the green color became the feet. This ‘Queen of the Toads’ is the most valuable piece we have ever carved.”

Patrick, born in 1970, apprenticed with his father, in keeping with the family’s tradition. “My father is the best teacher I could possibly get,” he says. Both work together at their home-based studio. “It’s not like a traditional job where you go home after work. I’m home already. And my boss is also my father!” Patrick explains that he was exposed to the craft as a toddler, with ample opportunities to absorb his father’s carving methods. Actual hands-on work began by the age of 18. In 1997, Gerd and Patrick traveled to Rio Grande do Sul, Brazil’s southernmost state, and brought back 3.5 tons of handpicked agate rough, which they continue to work with to this day.

The 1980s and ’90s also provided incredible new gemstone finds, such as large beryl crystals from Ukraine that were available after the fall of the Soviet Union. Gem materials were also emerging from Brazil and from newer sources such as Afghanistan, East Africa, and Madagascar. This gemstone windfall dovetailed nicely into the family’s growth, with two decades of some of the finest, largest, single-crystal gem materials that had been found in the twentieth century. A young bird’s nest lavishly carved from an enormous hexagonal Ukrainian green heliodor (figure 20) exemplifies the era. Sensitive to the beauty of the geometric etched pits on the crystal, Gerd Dreher left one face of the beryl intact with the gem’s natural surface. Similarly, a mouse carved from African ruby and zoisite (figure 21) illustrates the massive ornamental materials beginning to emerge from Africa at the time.

Gerd Dreher’s “Three Young Birds”
Figure 20. Gerd Dreher’s “Three Young Birds” (2006), a carving in Ukrainian heliodor, incorporates part of the natural beryl face in the base. The accents are 18K gold. The piece measures 11.5 cm tall and weighs 922 g (4,610 ct). Photo by Robert Weldon/GIA, courtesy of Silverhorn Jewelers.
Gerd Dreher ruby-in-zoisite mouse
Figure 21. Gerd Dreher’s ruby-in-zoisite mouse (1993), carved from a single piece of rough, has sapphire cabochon eyes and an 18K gold tail. It measures 6.8 cm tall and weighs 246 g (1,230 ct). Photo by Robert Weldon/GIA, courtesy of Silverhorn Jewelers.

Patrick says that he and his father consistently carve 12–20 new works every year, each of which may take 300–400 hours to complete. Father and son work both independently and collaboratively on pieces and continue to find new collectors to supply them with exceptional gem material.

Patrick’s own mastery of the craft was realized in a dramatic fashion when, after decades of apprenticeship, he detailed a plan to carve a rounded but completely smooth and glassy hippopotamus out of citrine quartz. “It cannot and should not be done—you’ll be wasting material,” his father chided. Nevertheless, Patrick was steadfast in his resolve, and his father ultimately agreed the piece was masterful (figure 22).

Patrick Dreher hippopotamus in citrine
Figure 22. This hippopotamus in citrine (2015) shows Patrick Dreher’s mastery in rendering the animal, which exhibits a highly polished, glistening surface. It measures 12.0 cm long and weighs 526 g (2,630 ct). Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.

Patrick has since carved a number of important pieces, including a starfish from a strawberry quartz specimen that in its rough state had concealed a secret. It was not until he began the removal of unwanted or damaged sections that the strawberry quartz revealed pale amethyst and colorless rock crystal quartz in the layers beneath. The color variations in the amethyst became a coral reef on an ocean floor of rock crystal (figure 23).

Patrick Dreher strawberry quartz starfish
Figure 23. Patrick Dreher’s strawberry quartz starfish (2014), carved from a crystal similar to the one shown on the right, revealed layers of amethyst and rock crystal as he carved into the stone. The “strawberry” portion of the single piece became the shiny starfish, resting upon an amethyst coral. The rock crystal quartz section was carved as the ocean floor. The starfish measures 13.6 cm tall and weighs 1,279.50 g (6,397.50 ct). Photo by Robert Weldon/GIA, courtesy of the William F. Larson family.

Inside their home studio, the Drehers take turns at the spindle. A collection of diamond-sintered tools, in different sizes and numbering in the hundreds, await their turn at the workstation. These tools, and the skilled use of them, bring out extremely fine detail. With a few exceptions, it is this detail that defines the present era. In his day, Paul Dreher carved unique large items like the puma and deer, in which the personality came to life in the carvings’ well-defined but smooth, soft surfaces, reflecting a mastery that was limited only by his tools. Today’s carvings have generally lost that smoothness in favor of extraordinary detail, attention to realism, and quality (see box B).

Box B: Dreher Carving Quality Factors
Quality of the Rough: The rough gem material must be extraordinary and rare, such as larger agates with unusual color banding and strength of color. This allows for the development of a themed finished carving. In transparent gems, the material is often crystalline and devoid of any obvious inclusions, resulting in clean, luminous carvings. 

Quality of the Carving: The carving must maintain lifelike proportions throughout, and symmetry from all viewing angles should be comparable to an actual animal’s appearance (figure B-1).

Gerd Dreher’s “Tree Frog”
Figure B-1. Gerd Dreher’s “Tree Frog” (2002) was carved from chrysoprase and meticulously worked so that the frog’s feet would curve to grasp the gold accents. The base of the carving is rock crystal quartz; the stem of the pond reed is 18K gold. The combined artwork weighs 1,032 g. Photo by Robert Weldon/GIA, courtesy of the Deutsches Edelsteinmuseum.
Details: Dreher carvings are studies in minute detail. How are these details rendered? Does the fur of a bear overlap? Are the ears of a mouse fine and translucent?

Use of Material: The Drehers sometimes spend years looking at a rough gemstone before starting to carve it. Considerable thought, planning, and execution go into the use of the gem’s color zoning to convey lifelike features, or to distinguish an animal from its environment.

Uniqueness: Dreher carvings are always original works of art. Though some poses might be similar, no two carvings are identical; there is always variation because they are carved in different materials and at different times.

Signatures: Contemporary work is signed by Patrick or Gerd Dreher. In figure B-2, “GD” is Gerd Dreher and “PD” is Patrick Dreher.

Artist’s signatures of Gerd and Patrick Dreher
Figure B-2. Unlike their Idar-Oberstein predecessors, the Drehers started signing their contemporary work in 1975. The signature on the left is that of Gerd Dreher, while Patrick Dreher’s initials are seen on the right. Photos by Robert Weldon/GIA.
Composite Works: Some Gerd Dreher carvings are composites of various gem materials. This generally dates a piece before the 1980s, expressing the material, the know-how, the demand, and the tools that were available at the time.

Single-Gem Carvings: Large single-crystal carvings reflect the company’s change in artistic direction and philosophy in the 1980s. Single-gem carvings reveal not only the rarity of the gem material but also the Drehers’ ability to render a complete three-dimensional carving from it.

Accents: Gold accents, such as tails and feathers, carved eyes and quartz bases, are used in both composite and single-gem carvings (figure B-1).


For centuries, the German towns of Idar and Oberstein have been known for agate cutting. Joined as one town before World War II, the region developed into a cutting and carving center for colored gemstones. Two of its principal carvers, Gerd and Patrick Dreher, can trace their family’s association with agate back thirteen generations, with the last five involved in three-dimensional gem carving. Father and son (figure 24) are considered by many to be the world’s greatest living gem carvers, and their work continues to be acquired by collectors around the world.

Gerd and Patrick Dreher
Figure 24. Gerd and Patrick Dreher in their studio. Courtesy of the Dreher family.


1Netsuke refers to a toggle or button adorned with a miniature carving, often depicting animals, made from ivory, wood, lacquer, bone, or metal.

Mr. Weldon is director, Ms. Jonathan is a research librarian, and Ms. Tozer is senior librarian at the Richard T. Liddicoat Gemological Library and Information Center in Carlsbad, California.

The authors wish to thank the Dreher family for giving us the opportunity to interview them, for helping us understand their history, and for opening the doors to their house and studio to photograph carvings. We thank Anette Fuhr, director of the Deutsches Edelsteinmuseum in Idar-Oberstein, for our interview with her and her permission to photograph selected pieces from the museum. Thanks also to Dieter Hahn, chairman of the Foundation of the Deutsches Edelsteinmuseum, for his insights into the history of the Idar-Oberstein region. GIA has assembled a large collection of photos of Dreher carvings over nearly a decade, starting when gem dealer Michael Ridding of Silverhorn Jewelers (Santa Barbara, California) brought the Dreher carvings to our attention in 2009, and we thank him. We are grateful to Leslie Hindman Auctioneers (Denver) for allowing us to photograph a major collection of Dreher carvings prior to their sale. Gem and mineral dealer Bill Larson and his sons, Carl and William, all of Pala International (Fallbrook, California), introduced us to the Dreher family. We thank them for accommodating our ongoing requests to photograph their growing collection of Dreher carvings.

Adams T. (1988) Fabergé’s use of oriental motifs. M.A. thesis, San Diego State University. https://archive.org/details/FabergesUseOfOrientalMotifs

Ball S.H. (1931) Historical notes on gem mining. Economic Geology, Vol. 26, No. 7, pp. 681–738, http://dx.doi.org/10.2113/gsecongeo.26.7.681

Collini C.A. (1776) Journal d'un voyage qui contient differentes observations mineralogiques: particulierement sur les agates, et le basalt. Avec un détail sur la maniere de travailler les agates. C.F. Schwan, Mannheim, Germany [in French].

Dreher E. (1979) Einer Schleiferfamilie mit Tradition uber drei Jahrhunderte. In K. Schultheiss, Ed., Heimatkalender des Landkreises Birkenfeld. Gemeinsam Verlegt von Arbogast, Otterbach, und Klebes, Baumholder, Germany, pp. 139–144.

Dreher G. (2012) Die Gestaltung von Tierfiguren aus Schmuckstein im Raum Idar-Oberstein nach 1950. In Gravierte Kostbarkeiten = Reznyye Sokrovishcha = Carved Treasures: Precious Stone Carvings from St. Petersburg and Idar-Oberstein at the German Gemstone Museum. Stiftung Deutsches Edelsteinmuseum, Idar-Oberstein, Germany.

Faber T. (2008) Fabergé’s Eggs: The Extraordinary Story of the Masterpieces that Outlived an Empire. Random House, New York.

Frazier S. (1978) The gem cutting industry of Idar-Oberstein Part II: Origins. ULW [United Lapidary Wholesalers] Show News, Vol. 2, No. 3, pp. 6–27.

Gabriel G. (2015) Lapidary centers of modern Russia. International Fabergé Museum Conference, Fabergé Museum, St. Petersburg.

——— (2017) Homage. In W. Lindemann, W. Larson, and E. Schneider, Dreher Carvings: Gemstone Animals from Idar-Oberstein. Arnoldsche Art Publishers, Stuttgart, Germany, pp. 230–231.

Gerdt O. (2017) Idar-Oberstein – A gemstone of Europe. In W. Lindemann, W. Larson, and E. Schneider, Dreher Carvings: Five Generations of Gemstone Animals from Idar-Oberstein. Arnoldsche Art Publishers, Stuttgart, Germany, pp. 8–13.

von Habsburg G. (1988) Fabergé. Habsburg, Feldman Editions, Geneva.

Hadley W. (1984) A new look at Idar-Oberstein. Rock & Gem, Vol. 14, No. 10, pp. 48–51.

Lindemann W. (2017) Gerd and Patrick Dreher - The art of stonecutting today. In W. Lindemann, W. Larson, and E. Schneider, Dreher Carvings: Gemstone Animals from Idar-Oberstein. Arnoldsche Art Publishers, Stuttgart, Germany, pp. 14–23.

Ovchinnikov M. (2017) The Dreher family cultural code. In W. Lindemann, W. Larson, and E. Schneider, Dreher Carvings: Gemstone Animals from Idar-Oberstein. Arnoldsche Art Publishers, Stuttgart, Germany, pp. 34–41.

Pauly H.U. (2012) Hans-Ulrich Pauly. In Gravierte Kostbarkeiten = Reznyye Sokrovishcha = Carved Treasures: Precious Stone Carvings from St. Petersburg and Idar-Oberstein at the German Gemstone Museum. Stiftung Deutsches Edelsteinmuseum, Idar-Oberstein.

Rapp G. (2002) Archaeomineralogy. Springer-Verlag, Berlin.

Snowman A.K. (1962) The Art of Carl Fabergé. Faber & Faber, London.

Where agates come from (1882) Scientific American, June 3, p. 352.

Wild K.E. (1981) Ueber die nachbildung Fabergésche Figuren in Idar-Oberstein. Goldschmiede-Zeitung, No. 2, pp. 108–109.